Shop Talk Live - Fine Woodworking

Amanda is joined by Ashley Pieper and Bonnie Elisabeth Hawk to discuss woodworking education and how it has carved a path for them in their furniture making careers.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Mike, Amanda, and Ben discuss router table techniques, fancy router-based tools, favorite vises, and Mike takes on a burst of quickfire questions.

For more information on our upcoming woodworking travel tour hosted by Anissa Kapsales and Phil Huber.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Hague Haswell and Vic Tesolin of Melbourne Tool Company join Ben to discuss what it's like to start a hand tool company from scratch.

This episode is sponsored by Melbourne Tool Company

For more information about their products: https://melbournetool.com/

Over three years of collaboration with woodworkers and designers, Melbourne-based woodworking retailer Timbecon has created a new brand of hand tools. A brand that takes inspiration from the past yet designs tools for today. A brand producing tools that are simple, accurate, and accessible to all people who are passionate about woodworking. A brand called Melbourne Tool Company.

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Anissa crosses the border to hang out with Vic and Steve Der-Garabedian and ask them questions about jointing veneer, minimalist woodworking, moving shop, and why the best place to use your track saw is on top of a table saw.

For more information on our upcoming woodworking travel tour hosted by Anissa Kapsales and Phil Huber - https://store.woodsmith.com/pages/tour/woodworkingtravel-2024sep-england

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Ben and Mike recap Fine Woodworking New England, and answer a couple questions from our listeners. Amanda is joined by Sophie Glenn, who answers questions on how to get started in metalworking, finishing tips, and how she translates woodworking techniques in her metalworking practice.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Mike, Anissa, and Ben discuss their lumber haulers, tolerances when cutting large joints, and safely cutting thin strips.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Amanda is joined by Owen Madden and Evan Court to discuss their work in production shops, how their backgrounds in other shops and schools effect their work flow, and their plans for the future.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Andrew Hunter joins Vic and Ben to discuss sharpening, carpeted workshops, and one listener's dining table issues. Amanda talks to Sophie Glenn, a metalworker/woodworker who you should know!

Sophie's IG - https://www.instagram.com/arcburn_furniture/

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Bob Van Dyke joins Mike and Amanda to discuss dovetail layout lines, tambour doors, and designing to a specific board. Also, Amanda and Ben discuss the fading future of affordable table saws.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

Find out more about Fine Woodworking New England here: https://www.finewoodworking.com/2024/03/06/fine-woodworking-new-england-april-26-27

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Vic and Ben welcome a new co-host into the mix and discuss resawing, adjusting the mouth of hand planes, easy-to-build knock-down benches, and how one Dr. can stop overusing their table saw.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Larissa Huff joins Vic and Ben to discuss working in the cold, dovetail layout, fancy tape measures, and if spokeshaves are in fact worth it.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Bill Pavlak and Dan Faia join Ben to discuss inspecting historic furniture, resawing by hand, and sharpening drawknives.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Woodsmith's Phil Huber joins Mike and Ben to discuss taking care of fine furniture, making tools and jigs, and the new home of Fine Woodworking.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Gary Rogowski joins Vic and Ben to discuss lumber yards, ungluing a chessboard, weird router bits, and hybrid sharpening setups.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Mike, Anissa, and Ben discuss Shaker furniture, fixing a bench top, oddball shelf joinery, and the conversation comes back to Christian Becksvoort over and over.

0:00 - Intro 1:31 - Random chat 11:12 - Becksvoorts Shaker cabinet feet 21:45 - Patching a benchtop 33:04 - Most embarrassing woodworking moment 49:38 - Weird wall shelf joinery

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

MatterHacker's Dave Gaylord joins Ben to discuss the plethora of digital tools available to woodworkers.

This episode is sponsored by MatterHackers

Check out MatterHackers on Youtube here: @MatterHackers

You can find links to the tools discussed in this episode at: https://www.finewoodworking.com/2023/11/10/stl-digital-woodworking-tools-with-matterhackers

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Well, not ALL bandsaws, but Rollie Johnson joins Vic and Ben to discuss the weird noises your bandsaw makes, resawing wood by hand, and flattening boards with handplanes.

0:00 - Intro 3:19 - Bandsaw noises and setup 40:33 - How to resaw without a bandsaw 50:33 - No room for a jointer!

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Anissa and Ben welcome David Johnson onto the show to discuss his work repairing furniture in LA.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Mike, Vic, and Ben discuss vacuum bags, coping saw blades, and ammonia fuming.

0:00 - Intro 3:03 - Catching up with Vic 10:52 - Vacuum bags 25:05 - Coping saw and fret saw blades 37:38 - Segments 50:54 - Fuming with ammonia

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Not really, it's really Mike, Anissa, and Ben discussing jointers and planers.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamental

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

0:00 - Intro 1:46 - 300 of these things 7:10 - Woodworkers making speakers 16:44 - Milling 1-3/4 stock 23:07 - Segments 36:15 - Do you need a jointer? 48:20 - What cutter head for a Dewalt 735

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

We chat with Father John Abraham of Benchcrafted and Phil Huber of The Woodsmith Shop, and Mike, Amanda, and Ben discuss all of the great woodworking festivals of late.

0:00 - Intro 2:30 - Chatting about festivals 16:35 - Phil Huber of The Woodsmith Shop 32:30 - Tools we dug seeing at shows 44:25 - Fr. John Abraham of Benchcrafted 1:02:18 - Wrapping it up

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamental

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Bob Van Dyke joins Mike and Ben to discuss sharpening to 80 grit, which wood is best for bending, bandsaw blade issues, and shoulder planes.

Sign up for our Woodworking Fundamentals journey here - www.finewoodworking.com/fundamentals

0:00 - Intro 2:23 - What's new at Bob's? 11:34 - Gluing hinges on a box? 19:41 - Steam bending wood 29:48 - Segments 40:35 - Sharpening to 80 grit 52:15 - Breaking bandsaw blades 59:10 - What shoulder plane to get?

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Gary Rogowski joins Vic and Ben to discuss adjusting hinges, using a chamfer bit for box miters, and making Queen Anne furniture without a bandsaw.

0:00 - Intro 1:28 - Adjusting hinges 27:41 - Chamer bit for box miters? 35:05 - Queen Anne furniture and no bandsaw

For more information about our eLearning courses - http://www.finewoodworking.com/elearning Join us on our new Discord server! - https://discord.com/invite/RhdBXNH2

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Bridgid from Dinkle's Woodshop joins Amanda and Ben to talk about her obsession with building bed frames, the best material for shop furniture, favorite tools, and how beginners can stop overthinking things in the shop.

0:00 - Intro 16:04 - How can a beginner shut up and start doing? 33:35 - All-time Favorites 43:48 - What to build shop cabinets out of? 51:14 - Help with bed frames!

Find Bridgid on YouTube: @dinkles_woodshop and on Instagram: https://www.instagram.com/dinkles_woodshop/

Join us on our new Discord server! https://discord.gg/RhdBXNH2

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

An important discussion about hearing health, and why it's important to every woodworker.

ISOtunes hearing protection merges certified protection with cutting-edge communication technology to give you a safe, enjoyable, and productive experience in the shop, on the job, and beyond.

Check out the entire line of ISOtunes here: https://isotunes.com/collections/hearing-protection

You can find Dr. Kathleen Wallace on TikTok here: https://www.tiktok.com/@eardocoftiktok and on Instagram here: https://www.instagram.com/drkathleenwallace/

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Mike, Vic, and Ben discuss (for the last time) shops without a table saw, when to sell a tool, and why the simplest way to get something done is the best way.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

In this episode, we talk about all things Windsor chairs with Aspen Golann and Kelly Harris, as well as their involvement with The Chairmaker's Toolbox.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Megan Fitzpatrick joins Vic and Ben to discuss round vs. square dogs, drilling at an angle, plane iron camber, and the best material to use on a bathroom vanity.

0:00 - Intro 5:00 - Square on a drill press when drilling at an angle 13:37 - Wood for a bathroom vanity 20:50 - How much of a camber 32:24 - All time favorites 44:24 - Angled dog holes?

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Tim Coleman tells us about his early days in woodworking and the difficult yet rewarding choices he made on his journey.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Not really—but Mike, Amanda, and Ben discuss their methods for kind of dialing it in, as well as prefinishing strategies, and how they use computer-aided design in their personal woodworking.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Vic and Ben answer eight listener questions, ranging from table saw throatplates to shiplap board spacing.

This episode is sponsored by the Texas Woodworking Festival: https://texaswoodworkingfestival.com/

Use the code "shoptalklive" to get 10% off your purchase.

Use the code "podcast20" to get 20% off of eLearning courses at http://www.finewoodworking.com/elearning

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Dan Faia joins Ben to answer listener questions, talk about the last 30 years of his woodworking journey, and what he hopes for out of the next 30 years.

This episode is sponsored by The Center For Furniture Craftmanship - https://woodschool.org/

Find out more about Dan at his website - https://danielfaia.com/

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Mike, Vic, and Ben discuss Vic's upcoming move (again), design classes, the features they'd want in a bandsaw, and what vises make them happiest.

0:00 - Intro 1:30 - Vic is moving again 19:15 - Mike and Vic teach design 30:17 - What size bandsaw would you choose? 43:02 - Segments

Links from this episode can be found here - http://www.shoptalklive.com

Find out more about Taunton's eLearning courses here - http://www.finewoodworking.com/elearning

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

We talk to two experts about considerations when using tropical hardwoods, and how to make the rain forest too valuable to burn.

For more info about Greenwood's next Artisan EcoTour, May 7-16 in Puerto Rico: Artisan EcoTour Info & Registration: https://www.greenwoodglobal.org/eco-tours

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Mike and Ben welcome new associate editor, Amanda Russell to the mix, and discuss sprayer options, magnets, and what other craft skills translate to woodworking.

0:00 - Intro 1:43 - A.I. furniture design 18:31 - Edge banding for plywood 25:48 - Segments 53:32 - Magnets for a knife block

Find out more about our eLearning courses here - http://www.finewoodworking.com/elearning

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Larissa, Vic, and Ben discuss A.I. in furniture design, edge banding for plywood, machine maintenance, and a listener's bandsaw issues.

Sponsored by Mortise and Tenon Magazine

Find out more about our eLearning courses here - http://www.finewoodworking.com/elearning

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Gary Rogowski joins Mike and Ben to discuss knockdown joinery ideas, steam bending, wood movement and what to do with your stuff when you die.

Find out more about Dave Richards' SketchUp class here: http://www.finewoodworking.com/elearning

0:00 - Intro 0:54 - The stages of becoming a better woodworker 16:35 - Knockdown joinery ideas 23:20 - What to do with your stuff when you die 35:50 - Segments 44:07 - Flattening wet stones without running water 46:40 - Wood movement

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

For more information about our eLearning courses, head over to http://www.finewoodworking.com/elearning

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Vic and Ben discuss life without a table saw, how much room a bandsaw takes up, bench top jointers, and how to be a good Instagram community member.

0:00 - Intro 2:04 - Instragm Trolls 21:15 - Life without a table saw and where to put a bandsaw 55:58 - Small jointer/planer combos and benchtop jointers

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Asa Christiana joins Mike and Ben to discuss tool libraries, the best way of fairing curves, and what one listener might be doing wrong with their hand plane.

0:00 - Intro 1:17 - Asa's new book 15:18 - Are tool libraries useful for new woodworkers? 23:03 - Skipping plane problems 30:35 - Segments 42:31 - Fairing a curved surface

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Mike, Anissa, and Ben discuss their favorite plywoods, how flat an assembly table needs to be, Mike's tormek, and corner desks.

0:00 - Intro 4:58 - Flatness of assembly tables 14:42 - Best plywood for fine woodworking 30:14 - What dead woodworker do you want to hang out with? 47:18 - L Shaped Desks 57:58 - How does Mike use his Tormek?

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

This episode is sponsored by Titebond. Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

This episode is sponsored by Titebond and Shaper

Sign up for PantoRouter's webinar on October 20th: www.finewoodworking.com/webinars

0:00 - Intro 1:39 - Teaching online 13:40 - The important parts of a mortise 31:10 - Using string as a clamp 47:19 - All-time favorite tools 1:03:35 - The piece of wood you don't want to cut

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Bob Van Dyke joins Mike and Ben to discuss table saw blade sharpening, drill press height, scary router bits coming loose, and his upcoming dovetail bootcamp.

Larissa Huff's Hand-routed Lettering video: https://www.finewoodworking.com/2022/09/16/hand-routed-lettering

Full-length Sam Maloof documentary: https://www.finewoodworking.com/2022/09/21/sam-maloof-woodworking-profile

0:00 - Intro 2:47 - Dovetail bootcamp - https://www.finewoodworking.com/elearning 20:34 - Table saw blade sharpening 32:49 - Drill press table height 43:34 - Segments 1:02:04 - Router bit on the move!

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Mike and Ben interview Joe Hebenstreit and Adi Rao about their work with Shaper—from the early prototypes to their newest offerings, Shaper Studio and Plate.

This episode is sponsored by Shaper.

For more information head on over to https://www.shapertools.com/

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Mike, Anissa, and Ben debate cutting boards and talk about taking box-making skills to the next level, fixing shellac mistakes, and solid-wood door movement.

0:00 - Intro 1:20 - Cutting boards 24:58 - Solid-wood door with kumiko 30:40 - Segments 48:19 - Fixing shellac mistakes 52:24 - Next level boxing

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.